FrisSpil Room divider

INSTALLATION INSTRUCTIONS
FriSpil – Room Divider
Standalone Room Divider Lamellas for Customizable Privacy and Design

MATERIALS

  • Floor rail (8mm deep groove) x1 (A)
  • Ceiling rail (20mm deep groove) x1 (B)
  • Lamellas: Quantity depends on wall width (C)
  • Screws Ø4-4.5mm with countersunk head
  • Wood glue

TOOLS

  • Drill or screwdriver
  • Handsaw with miter box, or electric saw
  • Level or laser measure
  • Tape measure
  • Pencil

INSTRUCTIONS

  1. Cut the Floor Rail:
    • Measure and cut the floor rail to the required length.
    • Note: Ensure the correct end faces outward into the room.
  2. Attach the Floor Rail:
    • Secure the rail to the floor using screws.
    • Alternatively, use glue if there is a possibility of pipes or cables beneath the floor.
  3. Cut the Ceiling Rail:
    • Measure and cut the ceiling rail to match the floor rail length.
    • Note: Confirm the correct orientation with the outward-facing side.
  4. Align Rails:
    • Use a level or laser measure to ensure the floor and ceiling rails are perfectly aligned.
    • Avoid any pipes or cables in the ceiling during installation.
  5. Measure and Cut Lamellas:
    • Measure the distance between the floor and ceiling rails (excluding grooves).
    • Cut the first lamella to a height of H 0 + 20 mm.
  6. Verify Alignment:
    • Check that the distance between the floor and ceiling rails is consistent across both ends.
    • If there is a slope, adjust the remaining lamellas accordingly to fit.
  7. Apply Glue:
    • Spread wood glue into the grooves of the floor rail.
  8. Install Lamellas:
    • Insert the top end of the lamella into the ceiling rail (1).
    • Place the bottom end into the floor rail (2).
  9. Repeat Installation:
    • Continue with steps 4–8 for all remaining lamellas until the divider is complete.

Key Features of FriSpil Room Divider:

  • Easy to Install: Minimal tools required; no visible screws for a clean finish.
  • Versatile Mounting: Choose between straight (90° rail) or angled (45° rail) lamella placement.
  • Premium Materials:
    • Oak Lamellas: Attractive grain, humidity-resistant, and durable.
    • Alternative Option: Finger-jointed pine with white transparent finish for a sleek, modern look.